GDV Drivers for old software, before 2012

Drivers for Windows 2000/XP/Vista/Seven (32 bit)

Driver device GDV Express
Driver device GDV Camera (GDV Compact)
Driver USB key HASP
Driver USB key Senselock
Driver for the camera Philips740K840K
Driver for the camera PhilipsSPC900NC

GDVDrivers

GDVDrivers(2)

GDVDrivers(1)

HASP

hasp4_driver_setup.zip

hasphl_driver_setup

Philips740K840K

PhilipsSPC900NC

CDMuninstallerGUI

Senselock

Checking GDV drivers installation and setting

1. Open the Control panel window in Windows 2000/XP. Start the icon System. Select the tab “Hardware” and click on the “Device manager”.
(In Windows 98 it is sufficient to select the tab “Device manager”.)

2. Disconnect the GDV Camera from the computer, wait for 5 seconds and connect it again.

3. Do you see in the list of hardware the yellow lines on the left? Or, just a single unknown device? If there are such, do they disappear when you disconnect the device from the computer?

3.1. If such device has the line “GDV Camera” in its name, press the right mouse button on the line with the name of the device, select Update/reinstall driver. Select the item Specified location.
Insert the CD with the GDV Software and indicate the path to the driver “<Your CD-drive letter>:\Drivers\GDVDrivers”. Answer yes to all questions of the OS. After that the marker on the right should disappear and the GDV Camera will work.

3.2. If such device has the line “Philips ToUCam” in its name, press the right mouse button on the line with the name of the device and select Update (reinstall) driver in the menu. Select the item Specified location.

Insert the CD with the GDV Software and indicate the path to the driver “<Your CD-drive letter>:\Drivers\Philips”. Answer yes to all questions of the OS. After that the marker on the left should disappear and the GDV Camera will work
There may be three such devices in different sections of the “Device manager”. Repeat the same operation for all of them.

4. Without closing the window of the “Device manager” connect the electronic key. Make sure that there is the line “Alladin USB key” or “Alladin HASP key” in the section USB controllers.
If there is no such line or if there is one with a yellow marker on the left, install the driver manually.

4.1. Download the archive hasphl_driver_setup.zip for the GDV Software 2005 package and higher.
(For the GDV Software package bought before June 2005, download the archive hasp4_driver_setup.zip).

4.2. Unpack the archive and run the file HASPUserSetup.exe for the GDV Software package 2005 and higher.
(For the GDV Software package bought before June 2005, run the file hdd32.exe).

4.3. Follow the instructions of the automatic installer.

How to remove drivers for working with GDV devices:

Make sure that none of the programs from the GDV Software has been started
Disconnect the GDV deice from the computer
Download the archives CDMuninstallerGUI.zip>>
Unzip it and run CDMuninstallerGUI.exe. You will see the following window:

How to remove drivers for working with GDV devices:

Make sure that none of the programs from the GDV Software has been started
Disconnect the GDV deice from the computer
Download the archives CDMuninstallerGUI.zip>>
Unzip it and run CDMuninstallerGUI.exe. You will see the following window:
Unzip it and run CDMuninstallerGUI.exe
5. Press button Add in the right-hand part of the window. The entered parameters VendorID and ProductID will be added to the list of devices for removal:

The entered parameters “VendorID” and “ProductID” will be added to the list of devices for removal
6. Enter in to field “ProductID” 6006 instead of 6001. “VendorID” must stay unchanged (0403):

Enter in to field “ProductID” 6006 instead of 6001. “VendorID” must stay unchanged (0403)
7. Again press button Add. The second device will be added to the list of devices for removal:

Again press button “Add”. The second device will be added to the list of devices for removal
8. Press button Remove Devices. If any warning messages appear, answer positively. The drivers for the devices with indicated parameters will be removed from the system. You will see the message:

Press button “Remove Devices”

If on step 8 Windows sends you a message that the suitable drivers have not been found, you need to make the so-called upgrade of your GDV device: to reprogram the USB identifier.
This procedure is done by technical support of KIRLIONICS TECHNOLOGIES INTERNATIONAL and specialists of GDV Sales Centers.

How to manually install drivers for working with GDV devices:

Start the GDV Capture program. Open window About program. See the build date of the program. If it is April 2009 or later, download the archives with drivers GDVDrivers32-64.zip>>

If the date is before April 2009, download the archives with drivers GDVDrivers.zip>>.
Close GDV Capture and make sure that other programs of the GDV Software are not started.
WARNING: If there is a 64-bit Windows version on your computer, the GDV Capture version
must be of April 2009 or newer. If your version of GDV Capture is older, please, refer
to technical support of KIRLIONICS TECHNOLOGIES INTERNATIONAL for the program update.
2. Unzip the downloaded archives. Remember the path to the unpacked driver files

3. Connect the GDV device to the computer and switch on the power of the device

4. On the computer screen you will see the request for installing the driver for the connected device:

On the computer screen you will see the request for installing the driver for the connected device
5. Select item Install from a list or specific location (Advanced) and press Continue:

Select item “Install from a list or specific location (Advanced)” and press ”Continue”
6. In the next window select Search for the best driver in these locations and check Include this location in the search. Uncheck Search removable media (floppy, CD-ROM) :

In the next window select ”Search for the best driver in these locations” and check ”Include this location in the search”
7. Press button Browse and select the folder to where you unzipped the downloaded archive with drivers. Press button Continue.

8. Windows will begin to install drivers. Answer all warning messages positively. After the drivers have been installed the following window will appear:

Windows will begin to install drivers. Answer all warning messages positively. After the drivers have been installed the following window will appear

9. Windows may repeatedly ask for driver installation. Then repeat items 4-8 once more.
10. That’s it! The drivers have been successfully installed. You may start GDV Capture and try to obtain GDV-images using the GDV device.

Gas Discharge Visualization Technique (GDV) is computer registration and analysis of gas discharge glow (GDV-images) of any biological objects placed in a high intensity electromagnetic field.

Tagged: Korotkov

2 thoughts on “GDV Drivers

  1. Hello

    I have a camera that I buy to an CAnary Island company some years ago
    I want to reinstall in other computer but I have Windows 8,1
    Wich drivers and software I need to install?

    The label says Serial A02 Nº 020030880607

    Thank you

    Pere Catafal

Comments are closed.