GDV Bio-Well instrument with GDV Sputnik antenna allows you to monitor time dynamics of the Energy of the Environment.
This may be interesting for several aims:
Testing different places looking for places with calm and turbulent energy.
Testing Energy situation in different places depending on the position of sun, moon, time of the year, etc.
Measuring energy in the Places of Power – both natural and man-made –temples, sacred places, ancient cities, etc.
Testing Geoactive Zones, in particular, Geopathic Stress Zones.
Detecting the influence of emotions and focused attention to the environment.
GDV ENVIRONMENT SCAN COMPARE:
To conduct a Dynamics Scan, you will use the following items: – Bio-Well Device – USB Cable – Bio-Well Software – Sputnik Sensor – Titanium Cylinder
The procedure should be as follows.
1. Insert Ti cylinder holder into Bio-Well window.
2. Connect Sputnik to the Ti cylinder holder.
3. Test the image in the Full Scan mode. It should look like a ring. In case of distorted images check the Ti cylinder holder position and touch Sputnik with your hand.
4. Press “Start” button. It takes 3 minutes until the line of the graph stabilizes at some level.
It is well known that people fell differently depending on environmental situation. In some places you sleep as a baby and wake up full of energy; in other places you have wonderful dreams and travel in beautiful places while you sleep. However, already since thousands of years, the existence of specific locations where people do not sleep well, get sick more easily, or where performance is lower has been empirically known. What is the difference between all these places? Very little is known in Western science. It is clear that combinations of different causes compose the phenomenon. This is a combination of the influence from the Earth – underground anomalies, hollows, water streams; gases in the atmosphere, both natural and industrial; electromagnetic background; and the influence from the Universe, Sun, Moon and Cosmic rays. Now it is practically impossible to distinguish between all these factors, so we need a common denominator to evaluate the overall situation in the particular place. Only rudimental evidence is available today, if such zones could be measured using accepted physical apparatus.
Bio-Well instrument gives you such an opportunity. Many years of research confirmed the idea that it allows to evaluate the Energy situation in the environment. Expeditions to different parts of the world: Peru, Colombia, India, Myanmar, Siberia, and many others demonstrated sensitivity of the instrument for evaluating environment. Scientific background has been developed and published in per-review journals, patents have been granted in several countries, and now this instrument has become available for public use. You need to take measurement for at least 30 min; the maximum time is not limited. In a calm, peaceful environment, after initial setting for about 5-15 minutes signal becomes quite stable (please see the graph below).
In the Geoactive zone variations of the energy may be very high. Graph below demonstrate the energy variation outside and inside the crop circle in England in summer 2006. As you see, outside the crop circle energy was quite stable, while inside it was increasing during all the time of measurement.
Same way you may detect the change of energy during sunrise and sunset (see graph below), or coming sunder storm. In parallel, you can measure transformation of the Human Energy Field – of yourself and other people. This way you will see you own reaction to the changes in environment.
Another example demonstrates the influence of concentrated human attention to the signal of the “Sputnik” sensor. At the graph below arrow denotes the moment when a person concentrated her intention on the sensor sending love to Humankind. As you see, this 28 reflected in significant increase of the graph. This experiment was repeated many times and in most cases in case of real concentration, effect was significant.
Measurements conducted during religious ceremonies, yoga meditations, public lectures, musical performances demonstrated that the signal of the Sensor statistically significantly changes during measurements and these changes are correlated with the course of event. Every 5 seconds Sensor measures time-line of several parameters and their Standard Deviation. To evaluate these changes you need to process data. After recording is finished press “Statistics” button and put benchmarks for the significant moments of the session (beginning of presentation, breaks, beginning and end of meditation, etc). Program calculates parameters for every marked interval and evaluates statistical difference between intervals. Data are presented as an Energy of light in Joules.